People Counters
The Trafsys Beams are easy to setup and maintain. They can
communicate wirelessly to a MIU-1000 through a 4.9 repeater
interface. Each beam set is identified by a unique serial number,
which is embedded in every data packet sent to the MIU-1000.
The Trafsys Directional Wireless Beams provide a simple way to
track the direction of people passing through a given area. The
beams communicate wirelessly to either an MIU-1000 or MIU-1500 data
controller. Each beam set is uniquely identified by a serial number
that is stamped into each of the transmitted packets to the data
controller.
The Traf-Sys Thermal Sensor is designed to count people moving
through a specific area by detecting body heat from each person and
generating a number each time a person crosses a "count line" which
can be customized by the installer.
The Traf-Sys Wired Beam Sensors are designed to work
with the RS485 interface of the MIU-1000 data controller. Traf-Sys
Wired Beam Sensors can measure directional traffic and are mounted
on each side of a doorway with a horizontal detection pattern.
Surround Sensor traffic counting systems are designed to collect accurate foot traffic data in swinging door entrance applications. The Surround door counter sensor has a built in microprocessor (smart chip) for greater accuracy and is unaffected by lighting conditions.
Traf-Sys Directional Wireless Outdoor Beams are a tamper-proof outdoor version of our Directional Wireless Beams. They are battery powered and transmit data over a wireless connection to the MIU-1000 data controller. Directional traffic detection enables these sensors to measure both inbound and outbound people counting statistics.
Monday, February 23, 2009, Trafsys
